How to Properly Install PPR Pipes: A Complete Guide

How to Properly Install PPR Pipes: A Complete Guide


How to Properly Install PPR Pipes: A Complete Guide

PPR (Polypropylene Random Copolymer) pipes are widely used for hot and cold water systems due to their strength, resistance to high temperatures, and corrosion-free properties. To ensure optimal performance and leak-free connections, proper installation is essential. Here’s a complete step-by-step guide on how to install PPR pipes correctly.

1. Tools and Materials Needed

Before starting the installation, prepare the following tools and materials:

  • PPR pipes (based on installation needs)
  • PPR fittings (elbows, tees, sockets, reducers, valves)
  • Pipe cutter
  • Heating tool or welding machine (heat fusion tool)
  • Measuring tape and marker for marking cut points
  • Clean cloth to wipe the pipe before welding

2. Step-by-Step PPR Pipe Installation

A. Measuring and Cutting the Pipe

  1. Measure the pipe length according to installation requirements.
  2. Mark the cutting point with a marker for accuracy.
  3. Use a pipe cutter to make a straight and smooth cut.
  4. Ensure no debris or rough edges remain after cutting.

B. Preparing the Heat Fusion Process

  1. Heat the welding tool until it reaches the working temperature (typically around 260°C).
  2. Insert both the pipe end and the fitting into the heating tool at the same time.
  3. Wait a few seconds until the surfaces soften and melt (heating time depends on pipe diameter).

C. Joining the PPR Pipe and Fitting

  1. Immediately connect the pipe and fitting after removing them from the heating tool.
  2. Push the pipe into the fitting without twisting to ensure a strong bond.
  3. Hold the connection for a few seconds until it solidifies.
  4. Ensure there are no gaps or misalignments in the joint.

D. Testing and Final Checks

  1. Allow the joint to cool down for a few minutes before use.
  2. Perform a pressure test to check for leaks in the system.
  3. If leaks are found, inspect and redo the connection if necessary.
  4. Make sure all pipes are properly aligned and securely installed.

3. Tips for an Optimal PPR Pipe Installation

  • Use a high-quality heating tool to maintain consistent temperature during welding.
  • Avoid overheating to prevent damage to the pipe.
  • Do not twist the pipe during connection to prevent weak spots.
  • Ensure the pipe end and fitting are clean before welding.
  • Select the appropriate fittings to avoid excessive pressure buildup.

Conclusion

Proper PPR pipe installation ensures a strong, long-lasting, and leak-free piping system. By following this guide, you can achieve a safe and efficient installation for residential, commercial, and industrial applications.

Get best price. Contact us :

Instagram            : oneplus.idn
Whatsapp           : +62 812-1113-3449
Maps                    : Jl. Raya Legok Karawaci, Legok, Kec. Klp. Dua, Kabupaten Tangerang, Banten